ENTERTAINMENT > Telematics System
INSPECTION
Refer to “Basic Diagnostic Procedure” in “TELEMATICS SYSTEM (DIAGNOSTICS)”. Basic Diagnostic Procedure">
Ignition timing Inspection
MECHANICAL(H4DO) > Ignition TimingINSPECTIONCAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.1. Before checking the ignition timing, check the following item:(1) Check the air cleaner element is free from clogging, spark plugs are in good condition ...
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve AssemblyINSPECTION1. CHECK MOTOR1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal No. 4, and check that the valve is fully opened on LH side and the valve is fully closed on RH side.C ...
Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel InjectorINSTALLATIONInstall in the reverse order of removal.NOTE:• Use new fuel injector holder, O-rings, rubbers and seal rings.• Install the fuel injector so that the connector joint faces the connector rotation stopper side of the fuel pip ...