Subaru Crosstrek Service Manual: Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Drive Gear
INSPECTION
Check the reduction drive gear for breakage or damage.
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Drive GearREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Remove the air ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Drive GearINSTALLATION1. Install the reduction drive gear to secondary pulley.2. Select the reduction drive gear shim. Reduction Drive Gear &g ...
Other materials:
Installation
SEAT BELT SYSTEM > Rear Seat BeltINSTALLATION1. SEAT BELT OUTER - REAR RH & LH1. Before installation, perform a unit inspection of retractor. Rear Seat Belt > INSPECTION">2. Install the seat belt outer - rear.CAUTION:• During installation, make sure that the seat belts are n ...
Station list
You can select, add or delete a station.
When the tab is touched on the main
screen, a station list will be displayed.
Select to sort the list in the chronological
order of when the Station List was
created.
Select to create a station.
The station can be created using track
...
Assembly
DRIVE SHAFT SYSTEM > Front Hub Unit BearingASSEMBLY1. Install the hub unit bearing to the ST securely.Preparation tool:ST: HUB STAND (927080000)2. Using a press, press the new hub bolts (b) until their seating surfaces contact the hub unit bearing (a).NOTE:Use the 12 mm (0.47 in) dia. holes in th ...
