Subaru Crosstrek Service Manual: Front wiper arm

Installation

WIPER AND WASHER SYSTEMS > Front Washer Nozzle and HoseINSTALLATIONCAUTION:Before installing the windshield glass and cowl panel, make sure there are no gravel in the installing area.1. Install the ...

Adjustment

WIPER AND WASHER SYSTEMS > Front Wiper ArmADJUSTMENT1. Operate the windshield wiper once.2. Check that the wiper blade is aligned with the point mark.3. Make sure that there is a gap of 1 mm (0.04 ...

Other materials:

Hazard warning flasher
Models without multi function display Models with multi function display The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works regardless of the position of the ignition switch. To ...

Preparation tool
COOLING(H4DO) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS18355AA000PULLEY WRENCH• Used for removing and installing water pump pulley.• Used with PULLEY WRENCH PIN SET (18334AA030).18334AA030PULLEY WRENCH PIN SET• Used for removin ...

Inspection
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingINSPECTION1. Moving the rear tire up and down by hand, check there is no looseness in bearing, and check the wheel rotates smoothly.CAUTION:If there is unsmooth sliding operation or abnormal noise in the bearing, replace the rear hub unit bearing.2. Inspe ...