Subaru Crosstrek Service Manual: Fresh/recirc door actuator

Removal

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Expansion ValveREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Using the refrigerant recovery system, discharge refrigerant. Refrig ...

Inspection

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > FRESH/RECIRC Door ActuatorINSPECTION1. CHECK LINK1. Visually check the operation range of the link, and remove the foreign material if any.2. Operate the ...

Other materials:

BSD/RCTA
The Subaru Ascent BSD/RCTA system integrates advanced rear corner radar technology, combining Blind Spot Detection and Rear Cross Traffic Alert to enhance driver awareness in critical situations. These intelligent safety features continuously monitor the rear and side zones of the Subaru Asce ...

List
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Read Current DataLISTItems to be displayedUnit of measureContentsNoteIn-vehicle Sensor Temperature°C (°F)A/C control panel input value — Quantity of SunloadW/m2A/C control panel input value — Air conditioner pressure SWON/OFFA/C con ...

Installation
EXTERIOR BODY PANELS > Rear DoorINSTALLATION1. REAR DOOR PANEL1. Put a wooden block on a jack and place the panel assembly - rear door on it.2. Apply grease to the moving part of door hinges.3. Adjust the height by the jack, and temporarily install the panel assembly - rear door to the upper hing ...