Subaru Crosstrek Service Manual: Engine control module (ecm)

Installation

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Electronic Throttle Control RelayINSTALLATIONInstall in the reverse order of removal.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb) ...

Inspection

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Control Module (ECM)INSPECTIONCheck that the ECM has no deformation, cracks or other damages. ...

Other materials:

Regarding radio wave
WARNING If you wear an implanted pacemaker or an implanted defibrillator, stay at least 8.7 in (22 cm) away from the transmitting antennas installed on the vehicle. The radio waves from the transmitting antennas on the vehicle could adversely affect the operation of implanted pacemakers a ...

Installation
MECHANICAL(H4DO) > Cylinder HeadINSTALLATION1. CYLINDER HEAD RH1. Clean the bolt holes in the cylinder block RH.CAUTION:To avoid erroneous tightening of the bolts, clean out the bolt holes sufficiently by blowing with compressed air to eliminate engine coolant etc.2. Apply liquid gasket to both s ...

Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch AssemblyADJUSTMENT1. Install the thrust bearing to the internal gear.NOTE:Face the temper color surface to the reverse brake side.2. Measure depth “A” from the ST upper face to the washer mounting surface.ST 499575600GAUGE3 ...