POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U1120 LOST COMMUNICATION WITH AUTOSTART STOP CONTROL MODULE
NOTE:
Refer to “LAN SYSTEM” for diagnostic procedure. Basic Diagnostic Procedure">
Dtc c2552 motor relay
Dtc u0122 lost communication with vehicle dynamics control moduleInspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Pressure SensorINSPECTION1. Start and warm up the engine.2. Depress the brake pedal, and shift the select lever to “D” range.3. Shift the select lever to “P” or “N” range.4. Depress the brake pedal and hold ...
List
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Read Current DataLIST• Combination meter (models with normal meters)Items to be displayedUnit of measureContentNoteIG on trip numbertimesTime stamp information — IG on supply system — Time stamp information — past time after IG onmsTime stam ...
Installation
CLUTCH SYSTEM > Clutch SwitchINSTALLATION1. CLUTCH SWITCH1. Install the clutch switch.2. Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.Clutch pedal full stroke A:130 — 135 mm (5.12 — 5.31 in)Tightening ...