Subaru Crosstrek Service Manual: Dtc c1361 normal closing valve 1
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC C1361 NORMAL CLOSING VALVE 1
NOTE:
For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 NORMAL CLOSING VALVE 2">
Dtc c1352 normal opening valve 2
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1352 NORMAL OPENING VALVE 2NOTE:For the diagnostic procedure, refer to “DTC C1362 NO ...
Dtc c1362 normal closing valve 2
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1362 NORMAL CLOSING VALVE 2DTC detecting condition:• Defective harness connector&bul ...
Other materials:
Birthday setting
1. Perform the preparation steps according
to "Preparation for date setting" 3-
56.
2. Operate the "
" or "
" switch to
select the "Birthday" item. Then push the
button.
3. Select an entry in the list to set by
operating the "
" or "
" switch. Then
push the
...
Power outlets
CAUTION
In the Subaru Ascent, never insert foreign objects into the accessory
power outlet, especially conductive materials such as coins or aluminum foil.
This can result in a short circuit or electrical damage. Always keep the outlet
covered with its cap when not in use.
If the plug ...
Assembly
STARTING/CHARGING SYSTEMS(H4DO) > StarterASSEMBLY1. Apply grease to the shaft sliding surfaces of the internal gear assembly.Grease:Multemp #6129 or equivalent2. Assemble the shaft to the internal gear assembly.3. Assemble the overrunning clutch as follows:(1) Apply grease to the spline portion o ...
