Subaru Crosstrek Service Manual: Dtc b28b1 stereo camera automatic adjustment
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B28B1 STEREO CAMERA AUTOMATIC ADJUSTMENT
Detected when the optical axis of stereo camera is deviated in lateral direction or when the fluctuation range of automatic adjustment value has expanded.
NOTE:
Readjust the stereo camera. Camera Adjustment, Inspection > PROCEDURE">
If the same DTC is still detected after readjustment, replace the stereo camera. Stereo Camera > REMOVAL">
Dtc b28af stereo camera adjustment incomplete
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28AF STEREO CAMERA ADJUSTMENT INCOMPLETEDetected when adjustment or inspection of stereo camera has not been com ...
Dtc b28b2 stereo camera high temperature
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28B2 STEREO CAMERA HIGH TEMPERATUREDetected when the temperature of the stereo camera excessively increases.NOTE ...
Other materials:
Hill start assist system
Ensure that the Hill start assist system
operates properly under the following
circumstances.
1. Stop the vehicle on an uphill grade by
depressing the brake pedal (all models)
and clutch pedal (MT models only), with
the engine running.
2. Make sure that the vehicle does not
move backward ...
Throttle position sensor Specification
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle Position SensorSPECIFICATIONThrottle body is a non-disassembled part, so do not remove the throttle position sensor from throttle body.Refer to “Throttle Body” for removal and installation procedure. Throttle Body > REMOVAL"> ...
Switches and harness
Inspection
Blind Spot Detection/Rear Cross Traffic Alert > Switches and HarnessINSPECTIONBSD/RCTA OFF switch1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard1 — 2Switch OFF1 M? or moreSwitch ONLess than 1 ?2. Apply ba ...
