Subaru Ascent 2018-2026 Owner's Manual: Surround View Monitor
The Subaru Ascent is equipped with a Surround View Monitor system that provides a comprehensive visual overview of the vehicle’s surroundings. This system displays real-time camera images on the center information display, helping the driver monitor blind spots and improve situational awareness.
It can be used to observe the front area while driving or starting off, the rear area when reversing, and the entire perimeter when parking the Subaru Ascent.
WARNING
- Never rely solely on the Surround View Monitor when operating the Subaru
Ascent. The displayed image may differ from actual conditions.
Always visually check the surroundings directly and use mirrors in addition to the monitor to avoid accidents.
- Avoid using the Surround View Monitor in the following conditions:
- Driving on rough, snowy, or unpaved roads.
- If any camera component is damaged or malfunctioning.
(e.g., lens or mounting bracket issues).
- When the outside mirrors of the Subaru Ascent are folded.
- If any front door is not completely closed.
- At low temperatures, the display image may become darker or less responsive. Moving objects may appear distorted or temporarily disappear, so always remain alert when driving the Subaru Ascent.
NOTE
If a malfunction occurs in the Surround View Monitor system, an error message will appear on the display. Refer to the center information display troubleshooting section for further guidance.
- How to change the display of Surround View Monitor
- How to cancel Surround View Monitor
- Range of Surround View Monitor
Under-floor storage compartment
CAUTION
While driving the Subaru Ascent, always ensure that the under-floor storage
compartment lid is securely closed. An open lid may become a hazard during sudden
braking or in the event ...
How to change the display of Surround View Monitor
When the ignition of the Subaru Ascent is in the "ON" position, the system can
be operated using the select lever and the view monitor switch to display various
camera angles.
Vi ...
Other materials:
Dtc c0036 rr pressure reducing valve malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0036 RR PRESSURE REDUCING VALVE MALFUNCTIONNOTE:For the diagnostic procedure, refer to “C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble C ...
Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
The select lever cannot be operated
unless the ignition switch is turned to the
"ON" position and the brake pedal is
depressed.
The select lever cannot be moved from
the "P" position to any other positio ...
Assembly
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingASSEMBLY1. Install the rear hub unit bearing to the ST securely.Preparation tool:ST: HUB STAND (927080000)(1)Rear hub unit bearing2. Using a press, press new hub bolts (b) until their seating surfaces contact the rear hub unit bearing (a).NOTE:Use the 12 ...
