Subaru Crosstrek Service Manual: Dtc b1771 buckle switch
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B1771 BUCKLE SWITCH
DIAGNOSIS START CONDITION:
Ignition voltage is 8 V to 16 V.
DTC DETECTING CONDITION:
• Passenger’s seat buckle switch is faulty.
• Passenger’s buckle switch circuit is open, shorted or shorted to ground.
• Occupant detection system is faulty.
• Occupant detection harness is faulty.
Perform the diagnosis from step 2 in “DTC B1655 FRONT BUCKLE SWITCH RH FAILURE”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1655 FRONT BUCKLE SWITCH RH FAILURE">
Dtc b1761 occupant detection sensor mat liquid coating
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1761 OCCUPANT DETECTION SENSOR MAT LIQUID COATINGDIAGNOSIS START CONDITION:Ignition voltage is ...
Dtc b1795 occupant detection module internal circuit
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1795 OCCUPANT DETECTION MODULE INTERNAL CIRCUITDIAGNOSIS START CONDITION:Ignition voltage is 8 ...
Other materials:
Component
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > General DescriptionCOMPONENT1. TORQUE CONVERTER ASSEMBLY AND CONVERTER CASE(1)Drive plate(13)Pitching stopper bracketTightening torque: N·m (kgf-m, ft-lb)(2)Reinforcement drive plate(14)O-ringT1:18 (1.8, 13.3)(3)Torque converter ASSY(15)Stud bolt ...
Replacement
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transmission Gear OilREPLACEMENT1. Pull out the oil level gauge.2. Lift up the vehicle.3. Using the TORX® bit T70, remove the drain plug, and drain the gear oil completely.CAUTION:• Immediately after the vehicle has been running or after idling f ...
Inspection
GLASS/WINDOWS/MIRRORS > Power Window SystemINSPECTIONSymptomsInspection orderAll power windows do not operate.(1) Check the fuse.(2) Check the power window relay.(3) Check the wiring harness.Particular window does not operate.(1) Check the fuse.(2) Check the switch - power window main.(3) Check t ...
