Subaru Crosstrek Service Manual: Diagnostic procedure with phenomenon
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostics with Phenomenon
DIAGNOSTIC PROCEDURE WITH PHENOMENON
Phenomenon | Check item | Reference | |
1 | CRUISE switch is not turned ON. (CRUISE indicator does not illuminate.) Or the cruise control is cancelled without CRUISE switch operation. | (1) Perform cruise cancel conditions diagnosis. | Perform the diagnosis according to displayed cancel code. |
(2) Perform the real-time diagnosis. | Check the input signal of cruise control system. | ||
(3) Check the cruise control command switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
(4) Check the CRUISE indicator. | Diagnostics with Phenomenon > CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT"> | ||
2 | Cruise control cannot be set. Or the cruise control is cancelled without canceling operation. | (1) Perform cruise cancel conditions diagnosis. | Perform the diagnosis according to displayed cancel code. |
(2) Perform the real-time diagnosis. | Check the input signal of cruise control system. | ||
(3) Check the cruise control command switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
(4) Check stop light switch and brake switch. | Stop Light Switch"> | ||
(5) Check clutch switch. | Clutch Switch"> | ||
(6) Check the neutral position switch. | Diagnostic Procedure with Cancel Code > 14"> | ||
(7) Check vehicle speed sensor. | Diagnostic Procedure with Cancel Code > 22"> | ||
3 | SET indicator does not illuminate. | Check the SET indicator. | Diagnostics with Phenomenon > CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT"> |
4 | Vehicle speed is not held within set speed ±3 km/h (±2 MPH). | Check the vehicle speed sensor. | Diagnostic Procedure with Cancel Code > 22"> |
5 | Vehicle speed does not increase or does not return to set speed after RES/+ switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the RES/+ switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
6 | Vehicle speed does not decrease after SET/− switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the SET/− switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
7 | Cruise control is not released after CANCEL switch has been pressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the CANCEL switch. | Diagnostic Procedure with Cancel Code > 11"> | ||
8 | Cruise control is not released after brake pedal has been depressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check stop light switch and brake switch. | Diagnostic Procedure with Cancel Code > 12"> | ||
9 | Cruise control is not released after shifting to the neutral position. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check the neutral position switch. | Diagnostic Procedure with Cancel Code > 14"> | ||
10 | Cruise control is not released after clutch pedal has been depressed. | (1) Perform the real-time diagnosis. | Check the input signal of cruise control system. |
(2) Check clutch switch. | Diagnostic Procedure with Cancel Code > 13"> | ||
Check cruise indicator light and cruise set indicator light
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostics with PhenomenonCHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHTTROUBLE SYMPTOM:Cruise control can be set, but the CRUISE indicator and S ...
Other materials:
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Speed SensorINSPECTION1. Set the ST between the TCM and bulkhead harness.ST 18460AA040CHECK BOARD2. Set the probe of oscilloscope to the check board connector.Connector & terminalNo. 13 (+) — No. 42 (−):(A)+ probe(B)− prob ...
Combination meter system Wiring diagram
WIRING SYSTEM > Combination Meter SystemWIRING DIAGRAM1. MODEL WITH NORMAL METER2. MODEL WITH COLOR TFT METER ...
When starting the engine
To start the engine with remote engine
start system, briefly press the lock button
twice within 2 seconds, then press and
hold the lock button for 3 seconds.
1. Press the lock button briefly. The
hazard warning flashers then flash once
and the keyless buzzer chirps once.
2. Within 2 secon ...
