Subaru Crosstrek Service Manual: Dtc b1615 front sub sensor lh failure
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble Code
DTC B1615 FRONT SUB SENSOR LH FAILURE
DIAGNOSIS START CONDITION:
Ignition voltage is 10 V to 16 V.
DTC DETECTING CONDITION:
Front sub sensor (LH) is faulty.
If DTC B1615 is displayed, the circuit within the front sub sensor (LH) is faulty.
Replace the front sub sensor (LH). Front Sub Sensor">
Dtc b1613 front sub sensor rh initialization error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1613 FRONT SUB SENSOR RH INITIALIZATION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition: ...
Dtc b1617 front sub sensor lh lost communication
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1617 FRONT SUB SENSOR LH LOST COMMUNICATIONNOTE:For details on DTC B1617, refer to DTC B1618. Diagnostic Chart with Trouble Cod ...
Other materials:
Warning chimes and warning indicator of he keyless access with push-button start
system
Access key warning indicator
In the Subaru Ascent, the keyless access with push-button start system is designed
to enhance both convenience and security. The system emits warning chimes and activates
the access key warning indicator on the combination meter to alert the driver of
incorrec ...
Adjustment
LIGHTING SYSTEM > Headlight AssemblyADJUSTMENT1. HEADLIGHT BEAM ADJUSTMENTCAUTION:• Turn off the light before adjusting the beam level of the light assembly - head. If it is necessary to inspect the beam level, do not keep the light on for two minutes or more.• When blocking the light ...
Disassembly
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Leak Check Valve AssemblyDISASSEMBLY1. Remove the drain separator from the leak check valve assembly. Drain Separator > REMOVAL">2. Disconnect the drain tube from the leak check valve assembly.NOTE:Disconnect the quick connector ...
