Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Disassembly

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Cooler (With Warmer Function)

DISASSEMBLY

1. Remove the bracket from the CVTF cooler (with warmer feature).

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Cooler (With Warmer Function)REMOVALCAUTION:If the CVTF and engine coolant is spilt over exhaust pipe, wipe it off with cloth to avoid emitting smok ...

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Cooler (With Warmer Function)INSPECTIONReplace any faulty CVTF cooler hoses, CVTF cooler pipes and clamps found in the inspection below.1. Check tha ...

Other materials:

Pretensioner connector Procedure
SEAT BELT SYSTEM > Pretensioner ConnectorPROCEDUREFor connectors of seat belt pretensioner, lap seat belt pretensioner and buckle switch RH, refer to “Airbag Connector” of “AIRBAG SYSTEM” section or “OCCUPANT DETECTION SYSTEM” section.• Airbag system: Ai ...

Installation
MECHANICAL(H4DO) > Engine AssemblyINSTALLATION1. Install the engine mounting onto the engine.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)2. Apply a small amount of grease to splines of main shaft. (MT model)Grease:NICHIMOLY N-130 or equivalent3. Position the engine in engine compartmen ...

Inspection
BRAKE > Stop Light SwitchINSPECTION1. CLEARANCE CHECKNOTE:Check for clearance is applied only to LED model.1. Measure the clearance between the end of the stop light switch and the stopper.Specification:Clearance (A) of the stop light switch: 1 mm — 2 mm (0.04 in — 0.08 in)(a)Stop light switc ...

© 2016-2025 Copyright www.sucross.com