Subaru Ascent 2018-2026 Owner's Manual: Defrosting
Select the "
"
or "
"
mode to quickly defrost or remove moisture from the windshield and front side windows
in the Subaru Ascent.
NOTE
- When either defrost mode is selected in the Subaru Ascent, the air conditioning
system may activate automatically to improve defogging performance, even if
the A/C indicator is not illuminated.
In addition, the system will automatically switch to outside air mode to enhance moisture removal and maintain clear visibility.
This behavior is normal and ensures faster and more effective windshield clearing.
- After using the defroster function, pressing the defroster button again will return the Subaru Ascent climate system to its previous settings.
Front seat heater and ventilation
Front seat heater
In the Subaru Ascent, the front seat heating system is designed to provide enhanced
comfort during cold weather and operates only when the ignition switch is in the
"ON&quo ...
Operating tips for heater and air conditioner
Cleaning ventilation grille
Front ventilation inlet grille
To maintain optimal performance of the Subaru Ascent climate system, always keep
the ventilation inlet grille free from snow, de ...
Other materials:
Refrigerant recovery procedure Procedure
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Recovery ProcedurePROCEDURECAUTION:• During operation, be sure to wear protective goggles and protective gloves.• Connect the refrigerant recovery system with the manifold gauge set to discharge the refrigerant from the A/C system ...
Disassembly
REAR SUSPENSION > Rear Trailing LinkDISASSEMBLY1. BUSHING A - TRAILING LINKUsing the ST, push out the bushing A - trailing link.Preparation tool:ST-A: INSTALLER (899874100)ST-B: INSTALLER & REMOVER (BASE) (20099PA010)2. BUSHING - TRAILING LINKFor the removal procedure of bushing - trailing li ...
Disassembly
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingDISASSEMBLYUsing the ST or a hydraulic press, push out the hub bolt (b) from the rear hub unit bearing (a).CAUTION:• Be careful not to hammer the hub bolts. This may deform the hub unit bearing.• Do not reuse the hub bolt.NOTE:Since the rear h ...
