WARNING
When the daytime running lights of the Subaru Ascent are active, the tail
lights remain off. As ambient light decreases, always switch the light control to
the "
"
position to activate both headlights and tail lights. This significantly improves
visibility and ensures that other drivers can clearly recognize your Subaru Ascent
on the road.
The daytime running light system in the Subaru Ascent is designed to automatically enhance vehicle visibility during daytime driving without requiring driver input. The system will activate when all of the following conditions are met:
",
or "OFF" (for Canada models).NOTE
When the light switch is set to the "
"
position, additional lighting elements such as instrument panel illumination, front
side marker lights, tail lights, and license plate lights will also be activated
in the Subaru Ascent.
High beam assist function
Steering Responsive Headlight (SRH)Dtc p0128 coolant thermostat (engine coolant temperature below thermostat regulating temperature)
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0128 COOLANT THERMOSTAT (ENGINE COOLANT TEMPERATURE BELOW THERMOSTAT REGULATING TEMPERATURE)DTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Thermo ...
Operation
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Read Current DataOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Sele ...
Installation
CLUTCH SYSTEM > Operating CylinderINSTALLATION1. Install in the reverse order of removal.NOTE:• Before installing the operating cylinder, apply grease to the contact point of the release lever and operating cylinder.Grease:NICHIMOLY N-130 or equivalent• Be sure to install the clutch h ...