Subaru Crosstrek Service Manual: Clutch disc and cover

Clutch system

...

Inspection

CLUTCH SYSTEM > Clutch Disc and CoverINSPECTION1. CLUTCH DISC1. Facing wearMeasure the depth from the facing surface to the rivet head. Replace if the face is worn locally or worn down to less than ...

Other materials:

Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CompressorINSTALLATIONCAUTION:• Replace the O-rings on the hose - pressure suction and discharge with new parts, and then apply compressor oil.• After replacing the compressor assembly, adjust the amount of the compressor oil. Compressor Oil ...

To arm the system using power door locking switches
1. Close all windows. 2. Remove the key from the ignition switch (models without "keyless access with push-button start system")/turn the push-button ignition switch to the "OFF" position (models with "keyless access with push-button start system"). 3. Open the doors and get out of the v ...

Assembly
DRIVE SHAFT SYSTEM > Front Hub Unit BearingASSEMBLY1. Install the hub unit bearing to the ST securely.Preparation tool:ST: HUB STAND (927080000)2. Using a press, press the new hub bolts (b) until their seating surfaces contact the hub unit bearing (a).NOTE:Use the 12 mm (0.47 in) dia. holes in th ...