Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Before using aha application

Subaru Crosstrek Owners Manual / Audio / Audio set / ahaTM by HARMAN / Before using aha application

In order to use the aha application on this system, the application must be installed on the smartphone.

Settings required to use aha application

Search and download the aha application from your smartphone app store.

Create an account and login to the aha application on the smartphone.

NOTE

Please use the latest version of the aha application.

About app-based connected content

Requirements for using the connected content services of the aha application on this system.

NOTE

About the supported devices

This system supports the following devices.

About the supported devices

NOTE

Note that the warranty does not apply if an unsupported iPhone/iPod touch is connected.

About the supported devices

NOTE

The available functions may vary depending on the type of Android device.

Control screen and panel
Control screen (main screen and station screen) Select to display the audio source selection screen. Select to open the station list. Refer to "Using aha application" Select to fast fo ...

Connecting a smartphone
If you connect a smartphone to this system after starting a supported aha application on the smartphone, you can display and operate the aha application displayed on the smartphone on the system ...

Other materials:

Dtc p0757 shift solenoid "b" stuck on
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0757 SHIFT SOLENOID "B" STUCK ONDTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Vibration occurs at shift change.& ...

Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the "ON" position then move the select lever to the "P" position with the select lever button pressed and brake pedal depressed. If the select lever does not move after performing the above procedure, perform the follo ...

Power saving function
The keyless access function will be disabled in the following cases to protect the access key battery and the vehicle battery. Case 1: When the keyless access function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked To recover the ...

© 2016-2026 Copyright www.sucross.com