Subaru Crosstrek Service Manual: Assembly

CAUTION:

• Be careful not to catch the harness in between the parts.

• When installing the mirror - repair, insert the connector and clip securely.

1. Install the light assembly - side turn mirror.

2. Install the cover - cap outer mirror.

3. Install the cover - cap outer mirror lower.

4. Check that all the claws are securely engaged.

5. Install the mirror - repair.

Outer mirror assembly

Removal

Other materials:

New vehicle break-in driving - the first 1,000 miles (1,600 km)
The long-term durability, efficiency, and overall performance of your Subaru Ascent depend greatly on how carefully the vehicle is treated during its initial driving period. Proper break-in practices help ensure that key engine and drivetrain components settle correctly and operate at their be ...

Dtc p2746 intermediate shaft speed sensor "b" circuit range/performance
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2746 INTERMEDIATE SHAFT SPEED SENSOR "B" CIRCUIT RANGE/PERFORMANCEDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Standing start problems• ...

Removal
INTAKE (INDUCTION)(H4DO) > Air Cleaner ElementREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake duct. Air Intake Duct > REMOVAL">3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B). ...