Subaru Crosstrek Service Manual: Wiring diagram
ENTERTAINMENT > Rearview Camera System
WIRING DIAGRAM
Refer to “Rearview Camera System” in the wiring diagram.
– 6.2 inch display: Rearview Camera System > WIRING DIAGRAM">
– 7 inch display: Rearview Camera System > WIRING DIAGRAM">
Inspection
ENTERTAINMENT > Rearview Camera SystemINSPECTION1. Park the vehicle at the level place where there are enough area at the rear of the vehicle.2. Attach the tape as the target point for standard at ...
Installation
ENTERTAINMENT > Rearview Camera SystemINSTALLATIONCAUTION:Be sure to confirm the marker position, whenever the rearview camera is removed/installed/replaced.Install each part in the reverse order o ...
Other materials:
Control module i/o signal Electrical specification
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Control Module I/O SignalELECTRICAL SPECIFICATION• Combination meterTerminal No.ContentTerminal No.Content1Security indicator27Ambient sensor2Charge warning light28UART (MFD)3Oil pressure warning light29Steering switch (+)4RH turn indicator30Pedes ...
Specification
POWER ASSISTED SYSTEM (POWER STEERING) > General DescriptionSPECIFICATIONWhole systemMinimum turning radiusm (ft)5.3 (17.4)Steering angleInner wheel38.2°±1.5°Outer wheel33.6°±1.5°Steering wheel diametermm (in)375 (14.76)Lock-to-lock revolution number2 ...
Inspection
SPEED CONTROL SYSTEMS(H4DO) > Accelerator PedalINSPECTION1. CHECK ACCELERATOR PEDAL SENSOR AREA (METHOD WITH CIRCUIT TESTER)1. Remove the glove box. Glove Box > REMOVAL">2. Turn the ignition switch to ON. (Engine OFF)3. Measure the voltage between ECM connector terminals.• Main ...
