Subaru Crosstrek Owners Manual: Selection screen
When the
button is pushed and held, the setting screen for each menu can be displayed.
Select the preferred menu by operating
the "
" or "
" switch.
| Top menu | Menu option | Description | |
| Time/Date | Time/Date | Set and adjust the time and date. 12h or 24h format can be selected. | |
| Birthday | Set a birthday. | ||
| Anniversary | Set an anniversary day. | ||
| Daylight Saving Time | Turn the daylight saving time on or off | ||
| Go Back | Return to the top menu. | ||
| Display | Contrast | Adjust the contrast. | +5 ↔ −5 |
| Screen Off | Turn the screen on or off. | On or Off | |
| Beep | Adjust the beep sound volume. | High, Low or Off | |
| Go Back | Return to the top menu. | ||
| Screen Setting | Top Display | Set and customize the top display information contents. | Avg Cons, Inst Cons, Range or Off |
| Cons | Customize the fuel consumption information display. | ||
| Eco History | Set and customize the time of logging fuel consumption history. | 30 min, 60 min or 120 min | |
| Triple Meter | Set and customize the triple meter. | ||
| Clock | Select the clock format. | Analog, Digital, Calendar or Off | |
| Bypass Screen | Set the bypass screen for each item. | On or Off | |
| Languages | Select the display language. | English or French | |
| Go Back | Return to the top menu. | ||
| Maintenance | Engine Oil | Set and adjust the oil maintenance notification date. | |
| Oil Filter | Set and adjust the oil filter maintenance notification date. | ||
| Tires | Set and adjust the tire maintenance notification date. | ||
| Maintenance Schedule | Set and adjust the vehicle maintenance notification date. | ||
| On/Off | Turn on or off the self-check screen that is activated when the ignition switch is turned to the "ON" position. | On or Off | |
| Clear All Settings | Clear all settings for maintenance items. | Yes or No | |
| Go Back | Return to the top menu. | ||
| Driving History | Set | Register and overwrite the driving record. | |
| Go Back | Return to the top menu. | ||
| Car Setting | Keyless Buzzer Volume | Set the audible signal volume | 0 (OFF) to 7 |
| Hazard Warning Flasher | Set the hazard warning flasher. | On or Off | |
| Defogger | Set and customize the operation of the defogger | 15 minutes or Continuous | |
| Interior Light | Set and customize the interior light off delay timer. | 10, 20, 30 seconds or Off | |
| Auto Light Sensor (if equipped) | Set and customize the sensitivity of the auto light sensor. | Low, Mid, High or Max | |
| Keyless Access Setting (if equipped) | Set and customize the keyless access function | Driver's Door Unlock | |
| Rear Gate Unlock | |||
| Go Back | Return to top menu. | ||
| Initialize | Reset to Defaults | Reset all settings to the default settings. | Yes or No |
| Lifetime Fuel Consumption Reset | Clear logged lifetime fuel consumption data. | Yes or No | |
| Go Back | Return to the top menu. | ||
| Go Back | - | Return to the top menu. | |
Clock/calendar screen
Clock (analog format)
Clock (digital format)
Calendar
Today's date
Birthday/Anniversary
In addition to the clock/calendar, the outside
temperature and average fuel consumption
...
Date and time settings
The items in the date and time settings
can be set. To change the items, operate
the "
" or "
" switch.
NOTE
The "Time/Date" item must be set to
display the "Birthday", "Anniversary"
...
Other materials:
Removal
EXTERIOR/INTERIOR TRIM > Console BoxREMOVAL1. Disconnect the ground cable from battery. NOTE">NOTE:On CVT models, shift the select lever into “N” before disconnecting the battery ground cable.2. Remove the console box assembly.(1) Release the claws, and then remove the boot - ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Control PanelINSPECTION1. CHECK ILLUMINATION1. Check the illumination operation when battery voltage is applied between the terminals of control panel.• Manual A/C modelTerminal No.Inspection conditionsSpecificationConnection diagram14 (+) — 12 ( ...
Installation
FRONT SUSPENSION > Front StrutINSTALLATION1. Install the strut mount - front at the upper side of the strut to the body, and tighten it with new flange nuts.Tightening torque:20 N·m (2.04 kgf-m, 14.8 ft-lb)2. Align alignment marks on the camber adjusting bolt and strut.Using new self-locki ...
