Subaru Crosstrek Service Manual: Replacement

Refer to “5MT” section for transmission gear oil replacement. Transmission Gear Oil > REPLACEMENT">

Inspection

V-belt

Other materials:

Assembly
CLUTCH SYSTEM > Clutch PedalASSEMBLY1. Install the stopper and pedal pad to the clutch pedal.2. Install the clutch switch to the pedal bracket.3. Clean the pedal bushing holes of the clutch pedal and the brake pedal, apply grease, and install the pedal bushings.4. Install the clutch pedal, brake ...

Installation
FRONT SUSPENSION > Front StrutINSTALLATION1. Install the strut mount - front at the upper side of the strut to the body, and tighten it with new flange nuts.Tightening torque:20 N·m (2.04 kgf-m, 14.8 ft-lb)2. Align alignment marks on the camber adjusting bolt and strut.Using new self-locki ...

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Pressure SensorREMOVALCAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• When secondary pressure sensor is removed, CVTF leak ...