Subaru Crosstrek Service Manual: Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven Gear
REMOVAL
1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">
2. Remove the extension case. Extension Case > REMOVAL">
3. Remove the transfer clutch assembly. Transfer Clutch > REMOVAL">
4. Remove the transfer driven gear assembly. Transfer Driven Gear > REMOVAL">
5. Remove the parking pawl. Parking Pawl > REMOVAL">
6. Remove the reduction driven gear assembly and spacer oil.
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven GearADJUSTMENT1. Measure the height “A” from the ST upper face to the ball bearing catch surface.ST 499575600GAUGE2. Meas ...
Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven GearASSEMBLY1. Using the ST, attach the collar.NOTE:• Attach the collar in the correct direction.• Use a new reduction drive ...
Other materials:
Preparation tool
BODY CONTROL SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, ...
Starting engine
CAUTION
Do not operate the starter motor
continuously for more than 10 seconds.
If the engine fails to start after
operating the starter for 5 to 10
seconds, wait for 10 seconds or
more before trying again.
NOTE
It may be difficult to start the engine
when the battery has been disconnecte ...
Preparation tool
STARTING/CHARGING SYSTEMS(H4DO) > General DescriptionPREPARATION TOOL1. GENERAL TOOLTOOL NAMEREMARKSCircuit testerUsed for measuring resistance, voltage and current.NOTE:• For measuring standby current, prepare a circuit tester that can measure by 1 mA unit.• For measuring standby cur ...
