Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF Filter

REMOVAL

NOTE:

Although CVTF filter is a maintenance-free part, replace it if a large quantity of wear debris and metal particles are found in CVTF and CVTF filter.

For removal of CVTF filter, refer to “Transmission Case”. Transmission Case > REMOVAL"> Transmission Case > DISASSEMBLY">

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF FilterINSPECTION• Check if a large quantity of wear debris or metal particles are in CVTF and CVTF filter.• Check for broken part or dam ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF FilterINSTALLATIONNOTE:For installation of CVTF filter, refer to “Transmission Case”. Transmission Case > ASSEMBLY"> Transm ...

Other materials:

Electrical specification
INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) SystemELECTRICAL SPECIFICATION1. MULTI FUNCTION DISPLAY• Standard typeTerminal No.ItemMeasuring conditionStandard1 (+B) ←> Chassis groundVoltageAlways10 — 14 V2 (GND) ←> Chassis groundResistanceAlwaysLess than 1 ?3 ...

Automatic headlight beam leveler warning light (models with HID headlights)
This light illuminates when the automatic headlight beam leveler does not operate normally. If this light illuminates while driving or does not turn off approximately 3 seconds after turning the ignition switch to the "ON" position, have your vehicle inspected at your SUBARU dealer. Fr ...

Engine control module (ecm) i/o signal Electrical specification
ENGINE (DIAGNOSTICS)(H4DO) > Engine Control Module (ECM) I/O SignalELECTRICAL SPECIFICATION1. ENGINE CONTROL MODULE (ECM)DescriptionConnector No.Terminal No.Signal (V)NoteIgnition SW ON(Engine OFF)Engine ON(Idling)Crankshaft position sensor(+) signalB1361650 or 5Waveform*(−) signalB1362700 ...

© 2016-2023 Copyright www.sucross.com