Subaru Crosstrek Owners Manual: Registering/connecting Bluetoothdevice
You can register up to five devices, regardless of whether they are Bluetooth phones or audio devices.
NOTE
- Once the phone has been registered, it is possible to use the handsfree system or Bluetooth audio
- Devices cannot be registered during driving.
- Registering a Bluetooth phone for the first time
- Registering a Bluetooth Audio device for the first time
- Profiles
Bluetoothsettings
WARNING
Be sure to park the vehicle in a safe
location before connecting or operating
a Bluetooth phone or audio
device. Failure to do so may result
in loss of control of your vehicle and
cause ...
Registering a Bluetooth phone for
the first time
To use the hands-free system, it is
necessary to register a Bluetooth phone
with the system.
For details about registering a Bluetooth
device: Refer to "Registering a Bluetooth
Audio device for ...
Other materials:
Inspection
INSTRUMENTATION/DRIVER INFO > Steering SwitchINSPECTION1. Measure the resistance between switch terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard3 — 2 (UP)i/SET (DOWN)All OFFApprox. 1 M? or more (UP)ONLess than 1 ?i/SETONApprox. 1,000 ? (DOWN)ONApprox. 3,670 ?2. ...
Inspection
CONTROL SYSTEMS > Select CableINSPECTIONCheck the removed cable and replace or adjust if damaged, rusty or malfunctioning.1. Check the cable for smooth operation.2. Check the inner cable for damage and rust.3. Check the outer cable for damage, bends and cracks.4. Check the boot for damage, cracks ...
Dtc p2401 evap system leak detection pump control circuit low
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2401 EVAP SYSTEM LEAK DETECTION PUMP CONTROL CIRCUIT LOWDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode ...
