Subaru Crosstrek Owners Manual: Power saving function
The keyless access function will be disabled in the following cases to protect the access key battery and the vehicle battery.
- Case 1: When the keyless access function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked
To recover the keyless access function: Operate one of the following items.
- Unlock the doors by operating any procedure other than gripping the front passenger's door handle
- Lock the doors
- Open a door and then close it
Case 2: When the access key has been left in the operating range for 10 minutes or longer while all doors are locked
To recover the keyless access function:
Operate one of the following items.
- Unlock the doors by gripping the door handle
- Unlock the doors by pressing the rear gate opener button
- Lock the doors by touching the door lock sensor
- Lock or unlock the doors by using the remote keyless entry system
- Lock or unlock the doors by using the power door locking switch
- Open either of the front doors
How to use keyless access functions
Keyless access function tips
Turn off the push-button ignition switch
before locking the doors (including rear
gate) using the keyless access function. It
is not possible to lock the doors ( ...
Door unlock selection function
The door unlock selection function makes
the following operations possible.
Unlocking the driver's door without
unlocking any other doors (including the
rear gate) when gripping the driver's ...
Other materials:
Certification for the Hands-free system
This device complies with Part 15 of FCC
Rules and Industry Canada's licenceexempt
RSSs. Operation is subject to
the following two conditions: (1) This
device may not cause harmful interference,
and (2) this device must accept any
interference received, including interference
that may cause u ...
Trailer Hitches
WARNING
Never drill the frame or under-body
of your vehicle to install a commercial
trailer hitch. If you do, dangerous
exhaust gas, water or mud may
enter the passenger compartment
through the drilled hole. Exhaust
gas contains carbon monoxide, a
colorless and odorless gas which is
dangero ...
Economy history setting
1. Perform the preparation steps according
to "Preparation for screen settings"
2. Operate the "
" or "
" switch to
select the "Eco History" item. Then push
the
button.
3. Push the
button once more.
4. Select the time of the logged fuel
consumption history by o ...
