Subaru Crosstrek Service Manual: Installation
LIGHTING SYSTEM > Light Control Sensor
INSTALLATION
Install each part in the reverse order of removal.
Removal
LIGHTING SYSTEM > Light Control SensorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the sensor - automatic light.CAUTION:Be careful not to damage the sensors and inte ...
Other materials:
Inspection
COMMUNICATION SYSTEM > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and check visually.2. If the fuse is blown out, replace the fuse.2. CHECK RELAY1. Check the resistance between relay terminals.Terminal No.Inspection conditionsSpecificationCircuit1 — 2Always1 M? or more1 — 2Apply ...
Inspection
CONTROL SYSTEMS > AT Shift Lock Control SystemINSPECTION1. SHIFT LOCK OPERATION• Model without push button ignition switchSTEPCHECKYESNO1.CHECK COMMUNICATION OF SUBARU SELECT MONITOR.1) Turn the ignition switch to ON.2) Using the Subaru Select Monitor, check whether communication to all sys ...
Battery
WARNING
Never expose the battery in your Subaru Ascent to open flames or sparks.
The battery emits highly flammable gases that can ignite and cause an
explosion if exposed to ignition sources.
Always wear appropriate eye protection when working near the battery
of your Subaru ...
