Subaru Crosstrek Service Manual: Installation

Subaru Crosstrek Service Manual / Hvac system (heater, ventilator and a/c) / Mode door actuator / Installation

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Mode Door Actuator

INSTALLATION

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">

Install each part in the reverse order of removal.

Removal

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Mode Door ActuatorREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in &ldq ...

Power transistor (auto a/c model)

...

Other materials:

Head restraints
The head restraint system in the Subaru Ascent is an essential safety feature designed to reduce the risk of neck and spinal injuries during rear-end collisions. Proper adjustment and correct usage of head restraints in the Subaru Ascent significantly enhance occupant protection and overall dr ...

Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch AssemblyASSEMBLY1. FORWARD CLUTCH ASSEMBLY1. Install the forward clutch piston to forward clutch drum.NOTE:• Apply CVTF to the seal of forward clutch piston.• Insert it all the way to the end.2. Install the return spring.3. In ...

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorREMOVAL1. Disconnect the ground cable from battery. Battery > REMOVAL">2. Remove the ambient sensor.(1) Disconnect the connector.(2) Release the claws, and then remove the ambient sensor from the bracket. ...