HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Blower Motor
INSTALLATION
Install each part in the reverse order of removal.
RemovalRemoval
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Drive PlateREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Set the ST.ST 498497300CRANKSHAFT STOPPER3. Remove the drive plate and reinforcement drive plate. ...
Removal
EXTERIOR/INTERIOR TRIM > Instrument Panel Lower CoverREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground cable from batt ...
Installation
AIRBAG SYSTEM > Airbag Control ModuleINSTALLATIONCAUTION:Do not reuse the bolt and nut.Always use new bolts and nuts for them.1. Before installation, inspect the following items and replace any faulty part with a new one.• Control module is deformed.• Control module connector is damag ...