GLASS/WINDOWS/MIRRORS > Rear Door Glass
INSTALLATION
CAUTION:
• Check that the running channel - rear door is securely fixed to the panel assembly - rear door and to the sash COMPL - rear partition.
• Before installing the glass assembly - rear door, check the lip of the running channel - rear door for being everted or tuck-in.
Install each part in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Description”. General Description > COMPONENT">
Rear door glass
RemovalWiring diagram
ENTERTAINMENT > Navigation SystemWIRING DIAGRAMRefer to “Navigation System” in the wiring diagram.• Model without telematics: Navigation System > WIRING DIAGRAM">• Model with telematics: Navigation System > WIRING DIAGRAM"> ...
Installation
CONTROL SYSTEMS > Select LeverINSTALLATION1. Set the select lever assembly to the vehicle body.2. Tighten the four mounting bolts to attach the select lever assembly to the vehicle body.Tightening torque:18 N·m (1.8 kgf-m, 13.3 ft-lb)3. Connect the harness connector.4. Install the harness ...
Removal
EXTERIOR/INTERIOR TRIM > Center ConsoleREMOVAL1. Remove the center grille assembly. Air Vent Grille > REMOVAL">2. Remove the audio assembly or navigation assembly. Audio > REMOVAL"> ...