Subaru Crosstrek Service Manual: Installation
EXTERIOR/INTERIOR TRIM > Assist Grip
INSTALLATION
Install each part in the reverse order of removal.
Assist grip
...
Removal
EXTERIOR/INTERIOR TRIM > Assist GripREMOVAL1. Pull both sides of the cap (a) using a flat tip screwdriver or similar tool wrapped with a protection tape.2. Pull the assist grip toward yourself (tow ...
Other materials:
Caution
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > General DescriptionCAUTION1. BSD/RCTA(1) In some cases, BSD/RCTA may not work correctly under the following conditions.• In bad weather such as heavy rain, fog, snow, sand storm, etc.• When ice, snow, dirt, etc. cover the r ...
Checking the oil level
1. Park the vehicle on a level surface and
turn the ignition switch to the "LOCK"/
"OFF" position. If you check the oil level
just after turning the ignition switch to the
"LOCK"/"OFF" position, wait a few minutes
for the oil to drain back into the oil pan
before checking the level.
Oi ...
Procedure
LIGHTING SYSTEM > Auto Headlight Beam Leveler SystemPROCEDUREWhen parts related to the auto headlight beam leveler system are removed or replaced, perform the following procedures to initialize or reinitialize.NOTE:Before performing initialization or reinitialization, check the following:• ...
