Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Installation

ENTERTAINMENT > Audio

INSTALLATION

CAUTION:

After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">

Do not allow harness and cables to interfere with or get caught by other parts.

Install each part in the reverse order of removal.

Tightening torque:

Audio assembly: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)

Audio
...

Removal
ENTERTAINMENT > AudioREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Descri ...

Other materials:

Inspection mode Procedure
TELEMATICS SYSTEM (DIAGNOSTICS) > Inspection ModePROCEDUREIt is possible to diagnose the DTC by performing the indicated inspection mode.After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1D ...

Dtc p2402 evap system leak detection pump control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2402 EVAP SYSTEM LEAK DETECTION PUMP CONTROL CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode ...

Switching power status
1. Apply the parking brake. 2. Shift the select lever into the "P" position. 3. Depress the brake pedal. 4. Hold the access key with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key and the vehicle is completed ...

© 2016-2024 Copyright www.sucross.com