SECURITY AND LOCKS > IG Relay1 (Push Button Start)
INSPECTION
Refer to “CHECK RELAY” in “Relay and Fuse”. Relay and Fuse > INSPECTION">
RemovalInspection
MECHANICAL(H4DO) > Cylinder HeadINSPECTION1. CYLINDER HEAD1. Visually inspect to make sure that there are no cracks, scratches or other damage.2. Use liquid penetrant tester on the important sections to check for fissures.3. Check that there are no marks of gas leaking or water leaking on gasket ...
Dimension
SPECIFICATIONS > CrosstrekDIMENSIONModel2.0 L DOHC non-turboOverall lengthmm (in)4,450 (175.2)Overall widthmm (in)1,780 (70.1)Overall height (at C.W.*1)mm (in)1,615 (63.6)CompartmentLengthmm (in)2,005 (78.9)Widthmm (in)1,490 (58.7)Heightmm (in)1,205 (47.4), 1,180 (46.5)*2Wheelbasemm (in)2,635 (10 ...
Head restraint adjustment
WARNING
Never drive the vehicle with the
head restraints removed because
they are designed to reduce the
risk of serious neck injury in the
event that the vehicle is struck
from the rear. Also, never install
the head restraints the opposite
way round. Doing so will prevent
the he ...