Subaru Crosstrek Service Manual: Inspection
SEATS > Rear Seat
INSPECTION
1. SEAT COVER
Check that there is no tear or fray on the cover COMPL - rear backrest and the cover - rear cushion.
Disassembly
SEATS > Rear SeatDISASSEMBLY1. Remove the rear seat. Rear Seat > REMOVAL">2. Remove the headrest assembly - rear backrest.3. Remove the armrest assembly - rear center. (model with armre ...
Installation
SEATS > Rear SeatINSTALLATIONInstall each part in the reverse order of removal.NOTE:• After installing the backrest assembly, make sure that each seat belt operates normally.• Make sure ...
Other materials:
Component
EXHAUST(H4DO) > General DescriptionCOMPONENT1. FRONT EXHAUST PIPE AND CENTER EXHAUST PIPE(1)Front exhaust pipe(12)Front exhaust pipe lower coverTightening torque: N·m (kgf-m, ft-lb)(2)Front catalytic converter(13)Front catalytic converter lower cover LHT1:13 (1.3, 9.6)(3)Center exhaust pip ...
Canceling the function for meter/gauge needle movement upon turning on the
ignition switch
It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the "ON"
position.
Type A combination meter
To change the setting, perform the following
procedure.
1. Turn the ignition switch to the "LOCK"/ ...
Removal
REAR SUSPENSION > Rear Sub FrameREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Lift up the vehicle, and then remove the rear wheels.3. Remove the bolts and clips, and remove the under cover - front.(1)Under cover - front(2)Mud guard - front(3)Spacer - under cover4. Remove t ...
