Subaru Crosstrek Service Manual: Inspection
LIGHTING SYSTEM > Auto Headlight Beam Leveler System
INSPECTION
Refer to “Basic Diagnostic Procedure” of “AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS)” section. Basic Diagnostic Procedure">
Procedure
LIGHTING SYSTEM > Auto Headlight Beam Leveler SystemPROCEDUREWhen parts related to the auto headlight beam leveler system are removed or replaced, perform the following procedures to initialize or ...
Other materials:
List
EyeSight (DIAGNOSTICS) > Freeze Frame Data DisplayLIST• List of freeze frame dataDisplayContentUnitECU Power Supply Voltage (IG)Display of input voltage of stereo cameraVEngine SpeedEngine speedrpmAccel opening angleAcceleration opening angle signal%Brake Fluid Target PressureTarget value o ...
Installation
CLUTCH SYSTEM > Clutch SwitchINSTALLATION1. CLUTCH SWITCH1. Install the clutch switch.2. Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.Clutch pedal full stroke A:130 — 135 mm (5.12 — 5.31 in)Tightening ...
Removal
LIGHTING SYSTEM > Front Fog Light BulbREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the screw and clips, and turn over the front side of the mud guard - front.3. From the bottom of the bumper face - front, remove the front fog light bulb.CAUTION:Use a dry clean clot ...
