Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Ignition switch (models without "keyless access with push-button start system")

Subaru Crosstrek Owners Manual / Instruments and controls / Ignition switch (models without "keyless access with push-button start system")

WARNING

CAUTION

Do not attach a large key holder or key case to either key. If it banged against your knees or hands while you are driving, it could turn the ignition switch from the "ON" position to the "ACC" or "LOCK" position, thereby stopping the engine.

Also, if the key is attached to a key holder or to a large bunch of other keys, centrifugal force may act on it as the vehicle moves, resulting in unwanted turning of the ignition switch.

Ignition switch (models without

The ignition switch has four positions: LOCK, ACC, ON and START.

NOTE

Instruments and controls
...

Lock
The key can only be inserted or removed in this position. The ignition switch will lock the steering wheel when you remove the key. If turning the key is difficult, turn the steering wheel slig ...

Other materials:

Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Drive PlateREMOVAL1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL">2. Set the ST.ST 498497300CRANKSHAFT STOPPER3. Remove the drive plate and reinforcement drive plate. ...

Dtc c1221 front left abs sensor circuit
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1221 FRONT LEFT ABS SENSOR CIRCUITNOTE:For the diagnostic procedure, refer to “DTC C1241 REAR LEFT ABS SENSOR CIRCUIT”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) & ...

Caution
BODY CONTROL SYSTEM (DIAGNOSTICS) > General DescriptionCAUTION1. SRS AIRBAG SYSTEMAirbag system wiring harness is routed near the body integrated unit and body control circuits.CAUTION:• Do not use the electrical test equipment on all airbag system wiring harnesses and connectors.• Be ...

© 2016-2024 Copyright www.sucross.com