Subaru Crosstrek Service Manual: General description

Subaru Crosstrek Service Manual / Continuously variable transmission(tr580) / Preparation for overhaul / General description

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Preparation for Overhaul

GENERAL DESCRIPTION

Before disassembling and assembling the transmission, follow the following procedures to prepare.

Procedure

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Preparation for OverhaulPROCEDURE1. Clean the transmission exterior.2. Remove the torque converter assembly. Torque Converter Assembly">3. Attac ...

Primary pulley and secondary pulley

...

Other materials:

Specification
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > General DescriptionSPECIFICATIONFuel tankCapacity60 L (15.9 US gal, 13.2 Imp gal)LocationUnder rear seatFuel pumpTypeImpellerShutoff discharge pressure750 kPa (7.7 kg/cm2, 108.8 psi) or lessDischarge rate82 L (21.7 US gal, 18 Imp gal)/h or more[12.5 V at 343 ...

Removal
DRIVE SHAFT SYSTEM > Front Drive ShaftREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the axle nut.CAUTION:Do not loosen the axle nut while the front axle is loaded. Doing so may damage the hub unit bearing.(1) Lift the crimped section of axle nut.(2) Remove the axle nut ...

Headlights
For U.S. models For Canada models In the Subaru Ascent, the headlight system is controlled using the rotary knob located at the end of the turn signal lever. By rotating this control, the driver can easily switch between different lighting modes depending on driving conditions and vi ...