Installation
InspectionInspection
BRAKE > Front Brake PadINSPECTION1. Check the pad thickness (A).NOTE:• Always replace the pads of both wheels and both sides as a set.• Replace pad clips if they are twisted or worn.• Replace the pad if there is oil or grease on it. Standard (A)Wear limit (B)Pad thickness11 mm ( ...
Removal
LIGHTING SYSTEM > Luggage Room LightREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - luggage room.CAUTION:When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.(1) Release the claws and remove the main ...
Inspection
LUBRICATION(H4DO) > Engine Oil FilterINSPECTION1. After installing the oil filter, run the engine and check for oil leakage.NOTE:The filter element and filter case are permanently jointed; therefore, interior cleaning is not necessary.2. Check the engine oil level. Engine Oil > INSPECTION&quo ...