Subaru Crosstrek Service Manual: Front fog light assembly

Installation

LIGHTING SYSTEM > Door SwitchINSTALLATIONInstall each part in the reverse order of removal. ...

Adjustment

LIGHTING SYSTEM > Front Fog Light AssemblyADJUSTMENT1. FOG LIGHT AIMING1. Before checking the fog light assembly - front beam level, be sure of the following:• The area around the fog light a ...

Other materials:

Inspection
EyeSight (DIAGNOSTICS) > General DescriptionINSPECTION1. BATTERYCheck the battery. Battery">2. WINDSHIELD GLASS AND DASHBOARDRemove the windshield glass and dashboard in front of the stereo camera.Standard:There must be no oil film, dirt, scratch or fogging that obstructs the forward vis ...

Tether anchorages
The Subaru Ascent is equipped with multiple tether anchor points (typically five or six, depending on configuration), allowing safe and reliable installation of child restraint systems with top tether straps. These tether anchorages in the Subaru Ascent are designed to provide an additional po ...

Installation
BRAKE > Brake BoosterINSTALLATION1. Check and adjust the operating rod of the vacuum booster assembly.(1) Measure the length between the vacuum booster assembly mounting surface and clevis pin hole.(2) If it is not within the specification, loosen the lock nut, rotate the vacuum booster assembly ...