Subaru Crosstrek manuals

Subaru Ascent 2018-2026 Owner's Manual: Folding down the seatback

WARNING

1. Store the seatbelt buckle.

Subaru Ascent third row seatbelt holder and buckle storage

  1. Holder

2. Place the window-side seatbelt into the holder to prevent damage during seat folding.

Remove it from the holder before using the seat again.

3. Lower the headrest to its designated storage position.

Subaru Ascent third row headrest folded position

4. While pulling the straps, fold down the seatbacks.

Subaru Ascent third row seat folding from inside
From inside

Subaru Ascent third row seat folding from cargo area outside
From outside

5. To return the seatbacks to their original upright position, push them up from inside the vehicle or pull the strap from the cargo area. Ensure the seatbacks lock firmly into place before use.

The third-row seating system in the Subaru Ascent is engineered to provide versatility and safety, allowing easy transformation between passenger seating and cargo space while maintaining high safety standards.

Third-row seats
The Subaru Ascent third-row seating area is designed to provide комфорт, практичність і безпеку для пасажирів навіть на задніх місцях. ...

Head restraints
The head restraint system in the Subaru Ascent is an essential safety feature designed to reduce the risk of neck and spinal injuries during rear-end collisions. Proper adjustment and correct usag ...

Other materials:

Removal
CONTROL SYSTEMS > Select LeverREMOVAL1. Shift the select lever to “N” range.2. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.3. Lift up the vehicle.4. Remove the center exhaust pipe. Cen ...

Tilt/telescopic steering wheel
WARNING Do not adjust the steering wheel tilt/telescopic position while driving. This may cause loss of vehicle control and result in personal injury. If the lever cannot be raised to the fixed position, adjust the steering wheel again. It is dangerous to drive without locking ...

Replacing battery of access key
CAUTION When removing or reinstalling the access key cover, make sure that the plastic part does not come off or become misaligned. Battery: Button battery CR2032 Release button Mechanical key 1. Take out the mechanical key. 2. Wrap a flat-head screwdriver with vinyl tape or ...

© 2016-2026 Copyright www.sucross.com