Installation
InspectionRemoval
REAR SUSPENSION > Front Lateral LinkREMOVAL1. Lift up the vehicle, and then remove the rear wheels.2. Remove the bolts and nuts, and then remove the trailing link.3. Remove the lateral link assembly - front.(1) Remove the snap pin (a) and nut (b).(2) Remove the ball joint from the housing assembl ...
Inspection
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLE (COMBINATION METER)Detecting condition:• Defective harness connector• Power supply circuit malfunction• Defective combination meter• Defective CAN commun ...
System operation
Operating conditions
The BSD/RCTA will operate when all of
the following conditions are met.
The ignition switch is in the "ON"
position.
The BSD/RCTA warning indicator and
BSD/RCTA OFF indicator are turned off.
The vehicle is driven at speeds above
6 mph (10 km/h) (except when rever ...