KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULE
Detected when CAN data from BIU is abnormal.
NOTE:
Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE">
Dtc u0401 invalid data received from ecm/pcm a
Dtc u0073 control module communication bus offInspection
GLASS/WINDOWS/MIRRORS > Wiper Deicer SystemINSPECTION1. CHECK SYSTEMNOTE:• The wiper deicer does not operate when the ambient temperature becomes 5°C (41°F) or more.• The wiper deicer operates with the rear window defogger at the same time.• It is possible ...
Installation
DRIVE SHAFT SYSTEM > Rear AxleINSTALLATION1. Temporarily tighten the rear axle housing to the upper arm assembly.2. Install the rear drive shaft assembly.CAUTION:• Do not hammer the drive shaft assembly when installing.• Use new axle nuts.(1) Insert the drive shaft assembly into the h ...
32
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Cancel Code32This DTC is detected out of vehicle speed range.Increase vehicle speed high enough to allow the cruise control to function, and then perform setting operation again.If cancel code is still detected after setting cruise a ...