Subaru Crosstrek Service Manual: Dtc u0156 lost communication with information center "a"
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"
DTC DETECTING CONDITION:
No data is received from MFD.
TROUBLE SYMPTOM:
Display of MFD does not operate properly.
| STEP | CHECK | YES | NO |
1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.
Was the basic diagnostic procedure performed up to STEP 3?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 2.
Perform the basic diagnostic procedure. Basic Diagnostic Procedure">
2.CHECK DTC.
Check the displayed DTC.
Are DTCs other than U*** displayed?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 3.
3.CHECK DTC.
Check the displayed DTC.
Is U0156 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 4.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 8.
4.CHECK DTC.
1) Check CAN communication circuit. CAN Communication Circuit Check">
2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0156 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 5.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 8.
5.CHECK DTC.
Using the Subaru Select Monitor, read DTC of all the systems. Read Diagnostic Trouble Code (DTC)">
Is the data no-receive detected in several modules?
Replace the MFD. Multi-function Display (MFD)">
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 6.
6.REPLACE MODULE.
1) Replace the MFD. Multi-function Display (MFD)">
2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0156 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 7.
System is normal.
7.CHECK MODULE.
1) Reinstall the MFD.
2) Replace the module that the DTC has been detected.
3) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0156 a current malfunction?
Replace the MFD. Multi-function Display (MFD)">
System is normal.
8.CHECK HARNESS.
1) Shake the harness, and check for poor contact.
2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0156 a current malfunction?
Repair the poor contact of harness, or replace the harness.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0156 LOST COMMUNICATION WITH INFORMATION CENTER "A"">Go to Step 9.
9.CHECK CONNECTOR.
Check the connector used for high speed CAN for poor contact.
Is there poor contact of connector?
Repair the connector that has poor contact, or replace harness.
It is possible that temporary poor communication occurs. Delete the DTC.
Dtc u0151 lost communication with restraints control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0151 LOST COMMUNICATION WITH RESTRAINTS CONTROL MODULEDTC DETECTING CONDITION:No data is received from airbag ...
Dtc u0155 lost communication with instrument panel cluster (ipc) control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0155 LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULEDTC DETECTING CONDITION:No data is r ...
Other materials:
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Check the resistance between relay terminals.&bul ...
Caution
IMMOBILIZER (DIAGNOSTICS) > General DescriptionCAUTIONCAUTION:• Do not use the electrical test equipment on the airbag system wiring harnesses and connector circuits.• Be careful not to damage the airbag system wiring harness.• While diagnostic items are being checked, do not op ...
Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Tank ProtectorINSTALLATIONInstall in the reverse order of removal.NOTE:Use a new self-locking nut.Tightening torque:T1: 9 N·m (0.9 kgf-m, 6.6 ft-lb) T2: 18 N·m (1.8 kgf-m, 13.3 ft-lb)(A)Self-locking nut ...
