EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE
Detected when CAN data from body integrated unit is not transmitted to stereo camera.
NOTE:
Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE">
Dtc u0122 lost communication with vehicle dynamics control module
Dtc b2806 ecm abnormalPassive arming (models without "keyless access with push-button start
system")
Passive arming mode
When passive arming mode has been
programmed by the dealer, arming of the
system is automatically accomplished
without using the remote transmitter. Note
that in this mode, DOORS MUST BE
MANUALLY LOCKED.
Passive arming mode
When passive arming mode has been
programmed by ...
Adjustment
SECURITY AND LOCKS > Impact SensorADJUSTMENT1. CHECK IMPACT SENSOR1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the windows.3. Close all the doors and rear gate. Leave open the front hood.4. Press the LOCK button of the keyless transmitter or access ...
Specification
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > General DescriptionSPECIFICATION1. MANUAL TRANSMISSION AND DIFFERENTIALModelCrosstrek modelType5-forward speeds and 1-reverse (all stage with synchromesh)Transmission gear ratio1st3.5452nd1.8883rd1.2964th0.9725th0.780Rev.3.333Front reduction gearFinalTy ...