Subaru Crosstrek Service Manual: Dtc c2422 transmitter 2 battery voltage low
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC C2422 TRANSMITTER 2 BATTERY VOLTAGE LOW
NOTE:
Refer to DTC C2424 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2424 TRANSMITTER 4 BATTERY VOLTAGE LOW">
Dtc c2421 transmitter 1 battery voltage low
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2421 TRANSMITTER 1 BATTERY VOLTAGE LOWNOTE:Refer to DTC C2424 for diagnostic procedure. ...
Dtc c2423 transmitter 3 battery voltage low
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2423 TRANSMITTER 3 BATTERY VOLTAGE LOWNOTE:Refer to DTC C2424 for diagnostic procedure. ...
Other materials:
Control unit Note
CRUISE CONTROL SYSTEM > Control UnitNOTESystem control of the cruise control is performed by each module. For procedure, refer to the following sections.• Engine control module (ECM): Engine Control Module (ECM)">• Transmission control module (TCM): Transmission Control Modu ...
Entering the vehicle while it is running via remote start (models without "keyless
access with push-button start system")
1. Unlock the Subaru Ascent using the remote keyless entry system.
NOTE
If the Subaru Ascent is unlocked manually with a physical key while the alarm
system is armed, the alarm will activate and the engine will stop. To deactivate
the alarm, perform one of the following actions.
Insert the ...
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CompressorINSPECTION1. MAGNET CLUTCH CLEARANCE INSPECTION1. Check the clearance of entire circumference around the drive plate and pulley.Specification:0.3 — 0.6 mm (0.0118 — 0.0236 in)2. Replace the compressor assembly if the inspection result is no ...
