Subaru Crosstrek Service Manual: Dtc c1222 front left abs sensor signal

NOTE:

For the diagnostic procedure, refer to “DTC C1242 REAR LEFT ABS SENSOR SIGNAL”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1242 REAR LEFT ABS SENSOR SIGNAL">

Dtc c1221 front left abs sensor circuit

Dtc c1231 rear right abs sensor circuit

Other materials:

Front towing hook
1. Take the towing hook and screwdriver out of the tool bucket. Take the jack handle out of the cargo area. 2. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch the bumper. Insert the flat-head screwdriver into the cutout of the cover and pry op ...

Inspection mode Procedure
ENGINE (DIAGNOSTICS)(H4DO) > Inspection ModePROCEDUREPerform the diagnosis shown in the following DTC table.When performing the diagnosis not listed in “List of Diagnostic Trouble Code (DTC)”, refer to the item on the drive cycle. Drive Cycle">DTCItemConditionB1570ANTENNA — ...

Replacing bulbs
WARNING Lighting bulbs in your Subaru Ascent can become extremely hot during operation. Always switch off the lights and allow sufficient time for the bulbs to cool before attempting replacement. Failure to do so may result in burns or injury. CAUTION Always replace bulbs in your Subaru Ascen ...