Subaru Crosstrek Service Manual: Dtc b1578 meter

DTC DETECTING CONDITION:

• Except for C5 model

Reference code incompatibility between combination meter and body integrated unit or communication failure between body integrated unit and ECM

• C5 model

Reference code incompatibility between security control module and body integrated unit or communication failure between body integrated unit and ECM

1.CHECK DTC.

Read the DTC of the body integrated unit. Read Diagnostic Trouble Code (DTC)">

Is any of DTC B1401, B1405, B1406, B1407, B1408 or B1409 detected?

Perform the diagnosis according to the DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B1572 IMM CIRCUIT EXCEPT ANTENNA CIRCUIT">

Dtc b1577 imm control module eeprom

General description

Other materials:

Selection of manual mode
In the Subaru Ascent, manual mode allows the driver to take direct control over gear selection for a more engaging and responsive driving experience. Whether the vehicle is stationary or in motion, you can activate this mode by moving the select lever from the "D" (Drive) positio ...

List of cancel code List
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > List of Cancel CodeLISTNOTE:• The cancel code is registered even when cancel is performed intentionally by the driver.• Cancel codes are cleared if the ignition switch is turned to OFF.• If a different cancel code is input after a cancel cod ...

Assembly
DIFFERENTIALS > Rear Differential (VA-type)ASSEMBLYNOTE:• Assemble in the reverse order of disassembly.• Check and adjust each part during assembly.• Keep the shims and washers in order, so that they are not improperly installed.• Thoroughly clean the surfaces on which the ...