SPECIFICATIONS > Crosstrek
DIMENSION
Model | 2.0 L DOHC non-turbo | ||
Overall length | mm (in) | 4,450 (175.2) | |
Overall width | mm (in) | 1,780 (70.1) | |
Overall height (at C.W.*1) | mm (in) | 1,615 (63.6) | |
Compartment | Length | mm (in) | 2,005 (78.9) |
Width | mm (in) | 1,490 (58.7) | |
Height | mm (in) | 1,205 (47.4), 1,180 (46.5)*2 | |
Wheelbase | mm (in) | 2,635 (103.7) | |
Tread | Front | mm (in) | 1,525 (60) |
Rear | mm (in) | 1,525 (60) | |
Minimum road clearance | mm (in) | 220 (8.7) | |
*1: Curb weight
*2: With sunroof
Crosstrek
WeightRemoval
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Hose and PipeREMOVAL1. LOW-PRESSURE HOSE1. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE">2. Remove the air intake boot. Air Intake Boot > REMOVAL">CAUTION:Move aside the ...
Removal
VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)REMOVAL1. MODELS WITHOUT EyeSight1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake boot. Air Intake Boot > REMOVAL">CAUTION:Move aside the intake boot to pe ...
Disassembly
REAR SUSPENSION > Rear Trailing LinkDISASSEMBLY1. BUSHING A - TRAILING LINKUsing the ST, push out the bushing A - trailing link.Preparation tool:ST-A: INSTALLER (899874100)ST-B: INSTALLER & REMOVER (BASE) (20099PA010)2. BUSHING - TRAILING LINKFor the removal procedure of bushing - trailing li ...