Subaru Crosstrek Service Manual: Check list for interview Check
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Check List for Interview
CHECK
• Inspect the following items regarding the vehicle’s state.
• Print out this page for interviewing customers.
Auto Headlight Beam Leveler System Check List for Interview Date the Vehicle is Received Year Month Day | |||
Customer’s name | Registration No.
| Initial year of registration Year Month Date | |
Vehicle model
| Frame number
| ||
Interviewer
| Inspector
| Engine type
| Odometer reading
|
Customer specified content • • • | |||
Date and time when the trouble occurred | Frequency of trouble occurrence | Always occurs Sometimes occurs ( times per day, times per month) | |
Condition of trouble occurrence (How the trouble occurs) | Weather | Fine • Cloudy • Rainy • Snowy • Others ( ) | |
Temperature | °C (°F) — °C (°F) | ||
Road conditions | Occurrence location | ||
Accessory installation condition | |||
Confirmation of trouble condition | |||
| |||
Diagnostic code
Basic diagnostic procedure Procedure
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURESTEPCHECKYESNO1.PERFORM CUSTOMER INTERVIEW.Using the Check List for Interview, ask the customer the condition o ...
Clear memory mode Operation
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information ...
Other materials:
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Drive Pinion Shaft AssemblyADJUSTMENT1. Remove the liquid gasket from the mating surface completely.2. Using the ST, install the drive pinion retainer to converter case.ST 18270KA020SOCKET (E20)NOTE:Do not confuse the three different-length bolts whe ...
Installation
GLASS/WINDOWS/MIRRORS > Rear Quarter GlassINSTALLATION1. Fabricate the cartridge nozzle tip as shown and set the sealant gun with the adhesive.(1)10 mm (0.39 in)(2)8 mm (0.31 in)(3)Sealant gun2. Smoothen and clean the adhesive surfaces of the glass - rear quarter and body using the same procedure ...
Installation
WIPER AND WASHER SYSTEMS > Washer Tank and MotorINSTALLATION1. Install each part in the reverse order of removal.CAUTION:• Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - fr ...
