Subaru Crosstrek Service Manual: Axle boots joints Inspection
PERIODIC MAINTENANCE SERVICES > Axle Boots & Joints
INSPECTION
1. FRONT AND REAR AXLE BOOTS
Inspect the front axle boots (A) and rear axle boots (B) for deformation, damage or failure. If faulty, replace with new part. Front Drive Shaft">
Rear Drive Shaft">
• Front
• Rear
2. PROPELLER SHAFT
Inspect the propeller shaft for damage or failure. If faulty, replace with new part. Propeller Shaft">
Air cleaner element Replacement
PERIODIC MAINTENANCE SERVICES > Air Cleaner ElementREPLACEMENTRefer to “IN” section for air cleaner element replacement. Air Cleaner Element"> ...
Brake line Inspection
PERIODIC MAINTENANCE SERVICES > Brake LineINSPECTION1. BRAKE LINE1. Check for scratches, swelling, corrosion, traces of fluid leakage on the brake hoses or pipe joints.2. Make sure that brake pipes ...
Other materials:
List of diagnostic trouble code (dtc) List
IMMOBILIZER (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LISTNOTE:If DTCs irrelevant to the immobilizer are detected, perform diagnosis according to the DTCs irrelevant to the immobilizer first.1. ECMDTCItemContents of diagnosisIndex No.B1570ANTENNAFaulty antenna Diagnostic Procedure with ...
Inspection
SECURITY AND LOCKS > Push Button Ignition SwitchINSPECTION1. Check the continuity between push button ignition switch terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsSpecification4 (COM) — 5 (GND)AlwaysContinuity exists7 (SSW1) — 5 (GND)Push button ignition switch re ...
Reset to factory default settings
1. Perform the preparation steps according
to "Preparation for initialization"
2. Operate the " " or "
" switch to
select the "Reset to Defaults" item. Then
push the button.
3. The system will prompt a Yes/No
dialogue ("No" is selected first). To return
to the factory d ...
