Subaru Crosstrek Service Manual: Assembly

Subaru Crosstrek Service Manual / Instrumentation/driver info / Combination meter / Assembly

INSTRUMENTATION/DRIVER INFO > Combination Meter

ASSEMBLY

Assemble each part in the reverse order of disassembly.

Removal

INSTRUMENTATION/DRIVER INFO > Combination MeterREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Release the lock, tilt the steering column to the lowest end and fully extend th ...

Other materials:

Inspection
SECURITY AND LOCKS > Keyless Access Indoor AntennaINSPECTION1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATION">2. Disconnect the Subaru Select Monitor. Operate the touch sensor of the door outer hand ...

Operation
Driver's side Passenger's side SRS AIRBAGs deploy as soon as a collision occurs. After deployment, SRS AIRBAGs start to deflate immediately so that the driver's vision is not obstructed. The SRS airbags can function only when the ignition switch is in the "ON" position. Th ...

Installation
DRIVE SHAFT SYSTEM > Rear Hub Unit BearingINSTALLATION1. Place the rear brake back plate between the rear axle housing and the rear hub unit bearing, and tighten the bolt.CAUTION:• Be careful not to damage the magnetic encoder.• Do not get closer the tool which charged magnetism to ma ...